Showing 51-79 of 79
SKU: 155-0867
This product is a replacement tank stud that is designed for use with the Meyer E-47H, E-57H & E-58H power unit.
SKU: MM-054
This replacement hydraulic motor is designed for use with the Meyer and Diamond line of snow plows.
SKU: 155-9885
Electric 12V pump motor - twin post - Double stud motor to eliminate ground issues - Unique motor has 2 locations for drain - Motor c... more
SKU: 155-0876
Pump Shaft Seal for Meyer E-47 Pump Assembly
SKU: 155-0874
Brush Kit Only, Bosch Type
SKU: 155-0879
Drive End Cap & Bushing, Bosch Type
SKU: 155-0880
Aluminum base and strainer assembly for Meyer E-47 and E-57 power units.
SKU: 155-0881
Filter Kit 1/2", fits Meyer E-47, E-47H & E-57, E-57H power units.
SKU: 155-0882
Pump Filter- Fits Meyer E-Series - Genuine Meyer 15619
SKU: 155-0883
Plug with 1/2" O-Ring and 5/8" hex head. Fits Meyer E-47, E-47H & E-57, E-57H power units.
SKU: 155-0886
This product is a replacement plug with 9/16" O-Ring and 11/16" hex head that is designed for use with the E-47, E-47H, E-57, E-57H, ... more
SKU: 155-9804
This product is a replacement pump assembly that is designed for use with the Meyer E-57, E-57H & E58H power units.
SKU: 155-0888
This product is a replacement pump check valve that is designed for use with the E-47, E-47H, E-57, E-57H, E-58H, E-60, E-60H, E-68, ... more
SKU: 155-0889
This product is a replacement O-Ring 1/4" ID that is designed for use with the E-47, E-47H & E-57, E-57H, E-58H, E-68, E-78, E-88... more
SKU: 155-0890
This product is a replacement strainer that is designed for use with the Meyer E-47, E-47, E-57, E-57H, E-58H, E-68, E-78, E-88 power units.
SKU: 155-0892
This product is a replacement O-Ring that is designed for use with the Meyer E-47, E-47H, E-57, E-57H, E-58H, E-68, E-78, E-88 power units.
SKU: 155-0893
This product is a replacement baffle that is designed for use with the Meyer E-47, E-47H, E-57, E-57H, E-68, E-78, E-88 power units.
SKU: 155-0894
Crossover Valve Kit fits older Meyer E-47, E-47H power units.
SKU: 155-0895
"C" Solenoid Check Valve Kit fits Meyer E-47, E-47H & E-57, E-57H power units.
SKU: 155-0896
Pilot Check Valve Kit fits Meyer E-47, E-47H & E-57, E-57H power units.
SKU: 155-0859
Top Pressure Relief Cap Kit - for Meyer E47, E58, E60, E60H
SKU: 155-0855
Cover and Wiper Assembly
SKU: 155-0821-K
A / B / C Coil Kit that fits Meyer E-47 / E-57 and E-60 power units and has single green, red and black wire. To check for a faulty c... more
SKU: 155-0820-K
A / B / C solenoid includes valve and coil that replaces 15358 on Meyer E-47 / E-57 and E-60 power units - Coil has single green wire... more
SKU: 155-0821-K2
A / B / C Coil Kit that fits Meyer E-47 / E-57 and E-60 power units and has single green, red and black wire. To check for a faulty c... more
SKU: 155-0972
Brush Kit - 4 piece - Fits Meyer power unit for 155-9885 motor
SKU: 159-0781
This product is a replacement retaining ring above baffle that is designed for use with the Meyer E-47, E-47H, E-57, E-57H, E-58H, E-... more
Complete E47 and E57 pumps are no longer available. All these units are now replaced with a genuine E58H Electro Lift Power Unit from Meyer. Mill Supply does carry all the replacement parts for the E47, E47H, E57 and E57H pump assemblies. Some of the parts that are listed: valve assembly with coupler (replaces the 15967), A, B and C Solenoid 'valve and coil assembly' (replaces 15356,15661, 15357, 15358), Crossover and master seal kits, cover and seal assembly, piston and sleeve, double stud motor, gaskets, plugs with O-rings, crossover valve kit, pump and pilot check valve kits and just about anything else on these pumps.
KEEP UP TO DATE
FOLLOW ALONG FOR SALES, EDUCATIONAL
VIDEOS, UPDATES, AND MORE! @millsupplyinc
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss
