Showing 1-50 of 79
SKU: 155-9801
E-58H Electro Lift Power Unit - This genuine Meyer power unit includes the cover and strap, adapters for older couplers, and coil har... more
SKU: 159-0701
Complete valve block assembly with couplers - Fits Meyer E-47 / E-57 / E-58H 12V power units - Includes all valves - double wire coil... more
SKU: 155-9802
This kit will increase the speed of your E-47 Meyer power unit. Kit comes with double stud motor, genuine Meyer pump, o-rings and stu... more
SKU: 155-0818
This product is a replacement allen head bolt to install pump to base. Designed for use with the Meyer E-57 power units.
SKU: 155-0802
A" Solenoid Valve & Coil Assembly Old Style. A 3/8" wrench size is used to remove top coil nut. Replaces Diamond & Meyer 15356
SKU: 155-0803
A" Coil Black Wire old style - 3/16" hole - Replaces Diamond & Meyer 15392
SKU: 155-0804
"A" Valve - Has 3/8" stem with 10-32 top thread. A 3/8" wrench size is used to remove top nut. - Fits Meyer E-47 and some E-60 power ... more
SKU: 155-0805
"A" solenoid includes new style valve and coil that replaces 15661 on E-47 / E-57 / E-60 power units - Coil has a single black wire a... more
SKU: 155-0806
"A" Coil Black Wire New Style - has 3/8" hole - Replaces Meyer 15659
SKU: 155-0807
"A" Valve - Has 1/2" stem with 3/8"-24 top thread. Uses 1/2" or 9/16" wrench to remove coil nut. Fits Meyer E-47, E-57 and E-60 power... more
SKU: 155-0808
This product is a replacement "A" valve seal kit that is designed for use with the Diamond & Meyer line of snow plows. Includes 3... more
SKU: 155-0812
"B" solenoid includes valve and coil that replaces 15357 on Meyer E-47 / E-57 and E-60 power units - Coil has single red wire and val... more
SKU: 155-0813
"B" coil - fits Meyer E-47 / E-57 and E-60 power units - Has single red wire - Symptom of a faulty "B" coil is plow will not raise - ... more
SKU: 155-0814
"B" Valve has 1/4"-20 top thread - Fits Meyer E-47 / E-57 and E-60 power units - This valve is normally closed - When the valve is op... more
SKU: 155-0815
This product is a replacement "B" valve seal kit that is designed for use with the Diamond / Meyer line of snow plows - Includes 4 o-... more
SKU: 155-0816
"B" Check valve ball and spring kit - Spring goes in first followed by ball and then "B" valve - Missing ball or spring will cause pl... more
SKU: 155-0820
"C" solenoid includes valve and coil that replaces 15358 on Meyer E-47 / E-57 and E-60 power units - Coil has single green wire and v... more
SKU: 155-0821
"C" coil that fits Meyer E-47 / E-57 and E-60 power units and has single green wire - Symptom of a faulty "C" coil is plow will not a... more
SKU: 155-0822
"C" valve has 1/4"-20 top thread and fits Meyer E-47 / E-57 and E-60 power units - This valve controls left and right movement - When... more
SKU: 155-0823
"C" seal kit - includes 5 O-ring seals and 3 back up rings. Follow O-ring / back up ring orientation from old seals
SKU: 155-0655
Adjustable crossover relief valve for Meyer & Diamond E-47, E-57 and E-60 power units. The purpose of this valve is to hold the p... more
SKU: 155-0830
This product is a replacement crossover valve seal kit that is designed for use with the Meyer line of snow plows
SKU: 155-0831
This product is a replacement basic seal kit that is designed for use with the Meyer E-47, E-57, E-58H, E-68, E-78, E-88 power units.... more
SKU: 155-0832
Master seal kit for Meyer E-47 and E-57 power units. Includes all seals for complete rebuild except gear pump seals.
SKU: 155-0833
This product is a replacement pilot check valve kit that is designed for use with the Diamond / Meyer line of snow plows - Fits E-47 ... more
SKU: 155-0835
This product is a replacement valve block piston that is designed for use with the Diamond / Meyer line of snow plows fits E-47 / E-5... more
SKU: 155-0836
This product is a replacement valve block plug that is designed for use with the Diamond / Meyer line of snow plows fits E-47 / E-57 ... more
SKU: 155-0837
O-Ring 9/16" ID - Replaces Meyer 15126
SKU: 155-0838
5/16" Nyltite Lock & Seal Washer - Replaces Meyer or Diamond 21929 - Used on E47 / E58 / E60 and E60H pumps
SKU: 155-9838
Genuine Meyer lift ram assembly complete. Includes 6" stroke lift ram, 7/16 o-ring, piston, packing cup, piston follower, and 1/... more
SKU: 155-0839
Lift Ram - 6" Stroke - Replaces Meyer 15208
SKU: 155-0840
Ram Electro Touch - 8" Stroke - Replaces Meyer 15206 - E-47, E-58, E-60, E-60H
SKU: 155-0841
O-Ring 7/16" I.D. - 15125 Meyer
SKU: 155-0842
Piston - 1-3/4" Diameter - Replaces Meyer 15158 - E-47, E-58, E-60, E-60H
SKU: 155-0843
This product is a replacement piston follower that is designed for use with the E-47 / E-57 / E-58 / E-58H / E-60H / E-68 / E-78 / E-... more
SKU: 155-0844
This product is a replacement packing cup that is designed for use with the E-47 / E-57 / E-58 / E-58H / E-60H / E-68 / E-78 / E-88 p... more
SKU: 97-542P
This product is a replacement nylon lock nut that is designed for use with the Meyer line of snow plows.
SKU: M-1689-P
This product is a replacement lock nut that is designed for use with the E-58H, E-68, E-78, E-88 power units.
SKU: 155-0856
This product is a replacement wiper that is designed for use with the E-58H, E-68, E-78, E-88 power units
SKU: 155-0858
Sleeve fits Meyer E-58H, E-68, E-78, E-88 power units.
SKU: 155-0650
This product is a replacement pressure relief valve with bushing that is designed for use with the E-47, E-47H, E-58H, E-60, E-60H, E... more
SKU: 155-0860
This product is a replacement 1-1/8" ID - O-ring that is designed for use with the E-47, E-47H, E-58H, E-60, E-60H E-68, E-78, E-88 p... more
SKU: 155-0852
This product is a replacement lock nut that is designed for use with the E47H / E57H / E58H & E60H power units
SKU: 155-0863
This product is a replacement O-Ring - 1-15/16" ID that is designed for use with the E-47, E-47H, E-58H, E-60H, E-68, E-78, E-88 power units
SKU: 155-0864
Cylinder Tank. Fits E46, E47 & E57
SKU: 155-0854
Cylinder Tank, 8-1/8" Tall. Fits Meyer E-47H, E-57H & E-58H power unit.
SKU: 155-0865
Stud. Fits Meyer E46, E47 & E57 power unit.
Complete E47 and E57 pumps are no longer available. All these units are now replaced with a genuine E58H Electro Lift Power Unit from Meyer. Mill Supply does carry all the replacement parts for the E47, E47H, E57 and E57H pump assemblies. Some of the parts that are listed: valve assembly with coupler (replaces the 15967), A, B and C Solenoid 'valve and coil assembly' (replaces 15356,15661, 15357, 15358), Crossover and master seal kits, cover and seal assembly, piston and sleeve, double stud motor, gaskets, plugs with O-rings, crossover valve kit, pump and pilot check valve kits and just about anything else on these pumps.
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss