Showing 1-50 of 85
SKU: 155-9801
E-58H Electro Lift Power Unit - This genuine Meyer power unit includes the cover and strap, adapters for older couplers, and coil har... more
SKU: 159-0701
Complete valve block assembly with couplers - Fits Meyer E-47 / E-57 / E-58H 12V power units - Includes all valves - double wire coil... more
SKU: 155-0802
A" Solenoid Valve & Coil Assembly Old Style. A 3/8" wrench size is used to remove top coil nut. Replaces Diamond & Meyer 15356
SKU: 155-0803
A" Coil Black Wire old style - 3/16" hole - Replaces Diamond & Meyer 15392
SKU: 155-0804
"A" Valve - Has 3/8" stem with 10-32 top thread. A 3/8" wrench size is used to remove top nut. - Fits Meyer E-47 and some E-60 power ... more
SKU: 155-0805
"A" solenoid includes new style valve and coil that replaces 15661 on E-47 / E-57 / E-60 power units - Coil has a single black wire a... more
SKU: 155-0806
"A" Coil Black Wire New Style - has 3/8" hole - Replaces Meyer 15659
SKU: 155-0819
This product is a replacement "A" coil - square design that is use with the Meyer line of snow plows - This coil is used in place of ... more
SKU: 155-0807
"A" Valve - Has 1/2" stem with 3/8"-24 top thread. Uses 1/2" or 9/16" wrench to remove coil nut. Fits Meyer E-47, E-57 and E-60 power... more
SKU: 155-0808
This product is a replacement "A" valve seal kit that is designed for use with the Diamond & Meyer line of snow plows. Includes 3... more
SKU: 155-0814
"B" Valve has 1/4"-20 top thread - Fits Meyer E-47 / E-57 and E-60 power units - This valve is normally closed - When the valve is op... more
SKU: 155-0812
"B" solenoid includes valve and coil that replaces 15357 on Meyer E-47 / E-57 and E-60 power units - Coil has single red wire and val... more
SKU: 155-0813
"B" coil - fits Meyer E-47 / E-57 and E-60 power units - Has single red wire - Symptom of a faulty "B" coil is plow will not raise - ... more
SKU: 155-0815
This product is a replacement "B" valve seal kit that is designed for use with the Diamond / Meyer line of snow plows - Includes 4 o-... more
SKU: 155-0816
"B" Check valve ball and spring kit - Spring goes in first followed by ball and then "B" valve - Missing ball or spring will cause pl... more
SKU: 155-0820
"C" solenoid includes valve and coil that replaces 15358 on Meyer E-47 / E-57 and E-60 power units - Coil has single green wire and v... more
SKU: 155-0821
"C" coil that fits Meyer E-47 / E-57 and E-60 power units and has single green wire - Symptom of a faulty "C" coil is plow will not a... more
SKU: 155-0822
"C" valve has 1/4"-20 top thread and fits Meyer E-47 / E-57 and E-60 power units - This valve controls left and right movement - When... more
SKU: 155-0823
"C" seal kit - includes 5 O-ring seals and 3 back up rings. Follow O-ring / back up ring orientation from old seals
SKU: 155-0655
Adjustable crossover relief valve for Meyer & Diamond E-47, E-57 and E-60 power units. The purpose of this valve is to hold the p... more
SKU: 155-0830
This product is a replacement crossover valve seal kit that is designed for use with the Meyer line of snow plows
SKU: 155-0931
This product is a replacement master seal kit that is designed for use with the Diamond & Meyer line of snow plows
SKU: 155-0932
Basic seal kit for Diamond & Meyer E-60 and E-60H power units - All seals for rebuild of lifting ram - reservoir and pump shaft seal
SKU: 256-0370
This product is a replacement 90 degree tall rigid male elbow that is designed for use with the Diamond line of snow plows.
SKU: 256-0365
This product is a replacement 90 degree male elbow.
SKU: 155-0833
This product is a replacement pilot check valve kit that is designed for use with the Diamond / Meyer line of snow plows - Fits E-47 ... more
SKU: 155-0835
This product is a replacement valve block piston that is designed for use with the Diamond / Meyer line of snow plows fits E-47 / E-5... more
SKU: 155-0836
This product is a replacement valve block plug that is designed for use with the Diamond / Meyer line of snow plows fits E-47 / E-57 ... more
SKU: 155-0837
O-Ring 9/16" ID - Replaces Meyer 15126
SKU: 155-0838
5/16" Nyltite Lock & Seal Washer - Replaces Meyer or Diamond 21929 - Used on E47 / E58 / E60 and E60H pumps
SKU: 155-0940
This product is a replacement ram assembly that is designed for use with the Meyer E-60 power unit. Does not fit E60H.
SKU: 155-0839
Lift Ram - 6" Stroke - Replaces Meyer 15208
SKU: 155-0840
Ram Electro Touch - 8" Stroke - Replaces Meyer 15206 - E-47, E-58, E-60, E-60H
SKU: 155-0841
O-Ring 7/16" I.D. - 15125 Meyer
SKU: 155-0842
Piston - 1-3/4" Diameter - Replaces Meyer 15158 - E-47, E-58, E-60, E-60H
SKU: 155-0843
This product is a replacement piston follower that is designed for use with the E-47 / E-57 / E-58 / E-58H / E-60H / E-68 / E-78 / E-... more
SKU: 155-0943
This product is a replacement packing cup that is designed for use with the Meyer E-60 power unit.
SKU: 155-0844
This product is a replacement packing cup that is designed for use with the E-47 / E-57 / E-58 / E-58H / E-60H / E-68 / E-78 / E-88 p... more
SKU: 155-0945
This product is a replacement washer that is designed for use with the E-60 / E-60H power unit
SKU: 97-542P
This product is a replacement nylon lock nut that is designed for use with the Meyer line of snow plows.
SKU: M-1689-P
This product is a replacement lock nut that is designed for use with the E-58H, E-68, E-78, E-88 power units.
SKU: 155-0855
Cover and Wiper Assembly
SKU: 155-0856
This product is a replacement wiper that is designed for use with the E-58H, E-68, E-78, E-88 power units
SKU: 155-0857
O-Ring 3-1/2" I.D. for Meyer 15131 for Meyer
SKU: 155-9858
This product is a replacement sleeve that is designed for use with the Meyer E-60 power units
SKU: 155-0650
This product is a replacement pressure relief valve with bushing that is designed for use with the E-47, E-47H, E-58H, E-60, E-60H, E... more
SKU: 155-0860
This product is a replacement 1-1/8" ID - O-ring that is designed for use with the E-47, E-47H, E-58H, E-60, E-60H E-68, E-78, E-88 p... more
SKU: 155-0963
This product is a replacement cylinder kit that is designed for use with the E-60 power unit only.
SKU: 155-0852
This product is a replacement lock nut that is designed for use with the E47H / E57H / E58H & E60H power units
Complete E60 and E60H pumps are no longer available. All these units are now replaced with a genuine E58H Electro Lift Power Unit from Meyer. Mill Supply carries all the replacement parts for the E60 and E60H units. Parts include: double stud motor (OEM# 15481), brush kit, motor mounting plate, pump shaft seal, O-rings, cylinder, studs, A, B, and C coil assemblies master and crossover seal kits, filters, ram packing cup, spacers and much more.
KEEP UP TO DATE
FOLLOW ALONG FOR SALES, EDUCATIONAL
VIDEOS, UPDATES, AND MORE! @millsupplyinc
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss
