Showing 1-33 of 33
SKU: 10-671
U-bolt - 5/8" x 7" for front suspension - fits John Deere & Oshkosh
SKU: 34-962
Front shock for Freightliner MT45 up to 1999
SKU: 34-975
Front shock - Fits Freightliner MT45, 2000 - present
SKU: 10-422
Front Shock - Fits Freightliner MT45
SKU: 99-347
Upper shock bolt for MT45. 1/2" x 5-1/2", Grade 8.
SKU: 99-339
Lower shock bolt for MT45. 1/2" x 4", Grade 8.
SKU: 99-812
1/2" Prevailing torque lock nut. Use with 99-347 or 99-339.
SKU: 99-712
1/2" Washer; used with 99-347 or 99-339.
SKU: 10-644
Shackle with bushing - that fits Freightliner MT35 & MT45 ( up to 1999 ) - John Deere & Oshkosh
SKU: 10-656
Shackle Bushing or Silent Block - Fits Freightliner MT35 / MT45 and FCC
SKU: 99-834
3/4" Prevailing torque lock nut; used with 99-515 or 99-344.
SKU: 10-657
Rubber stabilizer link bushing, fits top or bottom, sold individually - Fits Freightliner
SKU: 89-150
Polyurethane stabilizer link bushing set ( unassembled ) - sold in pairs. Includes Prelube for installation.
SKU: 34-860
Stabilizer sway bar link. 13" center of hole to center of hole. 14-1/2" Overall length - Fits 1999 & earlier Freightliner MT45
SKU: 10-440
Stabilizer sway bar link fits Freightliner. 6-7/8" center of hole to center of hole. 8-1/2" Overall Length. Use with our 5/8" bolt
SKU: 34-862
6-7/8" Front stabilizer sway bar link - Fits Freightliner MT45/MT55 with gas engine
SKU: 99-300
Two 3-1/2" x 5/8" Stabilizer Link Bolt Sets. 2 - Grade 8 bolts, 2 Prevailing Locking Nuts, 4 Washers.
SKU: 10-443
Upper mount with bushing that mounts to sway bar link - Fits Freightliner MT35/MT45
SKU: 99-353
Stabilizer link bolt, 5/8" x 3 1/2", Grade 8.
SKU: 99-858
5/8" Prevailing torque lock nut; used with 99-353
SKU: 10-655
Polyurethane sway bar bushing - fits Freightliner MT35 front & rear - MT45 front from 1999 and earlier - 1-5/8" ID
SKU: 10-674
Polyurethane Sway Bar Bushing 1- 1/2'" ID Stabilizer Front Suspension - Fits Freightliner
SKU: 10-611
Poly Sway bar bushing that fits Freightliner MT45 from 2000 to present, 1-1/2" inside diameter.
SKU: 89-160
Left Tie rod end has bent offset design, 8"L from grease fitting to end, verify length before ordering - Fits Freightliner
SKU: 89-161
Right Tie rod end, 8"L from grease fitting to end, verify length before ordering.
SKU: 10-459
Upper Bracket Assembly for shock. Dim: 7.25" x 5.75 x 2.25" - Fits Freightliner
SKU: 89-015
Left Tie Rod End, 10.25" from grease fitting to end - that fits MT45 (2001 & on) & MT55
SKU: 89-017
Right Tie Rod End, 10-1/4" from grease fitting to end - that fits MT45 (2001 & on) & MT55
SKU: 89-019
Complete Tie Rod Assembly, approximately 65" overall length. Popular on Freightliner MT45 & MT55
KEEP UP TO DATE
FOLLOW ALONG FOR SALES, EDUCATIONAL
VIDEOS, UPDATES, AND MORE! @millsupplyinc
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss
