Showing 1-43 of 43
SKU: K-167-A
Complete Slam Latch Assembly. This assembly includes a spring loaded center mechanism and spring loaded tapered latch bolts. With thi... more
SKU: K-167-C
Spring Loaded Center Mechanism for K-167-A Slam Latch Assembly. When the forked ends are pushed in, they spring back out. This latch ... more
SKU: K-167-B
Tapered latch bolt for K-167-A and K168-1 slam latch assemblies
SKU: K-167-R
Rod for K-167-A spring loaded slam latch assembly - 28-7/8"L - This rod has a thin slot on one side and a long slot on the other - Th... more
SKU: M-1367
Upper strike plate for K-167-A ( not included with assembly )
SKU: 565698-BOZ
Latch Bolt - Zinc for 565698 assembly
SKU: 24-366
Spring Loaded Slam Latch Bolt. Can connect to cable, chain or rod. This is an optional top bolt for a snug fit when replacing 565698B... more
SKU: 565698-R
Rod for 565698 Assembly - 2 Needed Per Latch
SKU: K-168-1
Cable Operated Slam Latch Assembly. This assemblies center mechanism is not spring loaded, the end latches are spring loaded and allo... more
SKU: K-168-C
Center Mechanism with Inside Release Handle for K-168-1 Assembly - This is a Genuine Kason center mechanism - It is spring loaded - T... more
SKU: K-168-3
Inside release handle for K-168-C center mechanism
SKU: K-168-CAB
72" Cable Assembly ( One Needed ) - Fits K-168-1 Slam Latch
SKU: 29-700
41" Cable with Eyelet used with K168-1 Latch Assembly - Two are needed for one latch assembly
SKU: 29-701
Adjustable Cable End Fitting for K168 Latch
SKU: 29-702
Dual cable assembly for K168 Latch. Replaces single cable on K168 assemblies. Includes 2 cables and 2 adjustable end fitting kits
SKU: 114-COR
Center Mechanism for Slam Latch with Override Release Handle
SKU: 121-BO
Offset Bolt for Slam Latch with Override
SKU: VCC-96
96" Vinyl covered cable with four crimp stops for cable operated rear door latch assemblies.
SKU: 110-A-OO
Dead Bolt Latch Assembly with Offset End Bolts. This assembly requires the handle to be turned to close the door. The center mechanis... more
SKU: 110-A-FF
Dead Bolt Latch Assembly with Flush Bolts. This assembly requires the handle to be turned to close the door. The center mechanism doe... more
SKU: 110-A-FO
Dead Bolt Latch Assembly with 1 Offset End Bolt and 1 Flush End Bolt. This assembly requires the handle to be turned to close the doo... more
SKU: 110-C
Center Mechanism without Spring Return. This center mechanism is used with our 110 Dead Bolt Latch Assemblies.
SKU: 110-B-F
Flush Latch Bolt for our 110 dead bolt door latch assembly. This end bolt is not spring loaded
SKU: 110-B-O
Offset Latch Bolt for our 110 dead bolt latch assembly. This end bolt is not spring loaded
SKU: K-160-A
Complete rod style dead bolt assembly - The Center Mechanism is not spring loaded - You can not slam this latch - You would need to t... more
SKU: K-160-C
Center Mechanism, for K-160-A Dead Bolt Assembly (Not spring loaded) - Genuine Kason
SKU: K-160-R
Kason 45" x 1/2" Rod for K-160A and K-167A rear door latch assemblies - This rod has a double flat cut 1/4" from the end on one side ... more
SKU: K-167-BK
Rod bracket 4 used per assembly - sold each - These are used on K167A spring loaded slam latch and K160A dead bolt latch assemblies
SKU: 114-A-OO
Spring Loaded Slam Latch Assembly with 2 Offset Bolts. This assembly includes a center mechanism with a spring return and spring load... more
SKU: 114-A-FF
Spring Loaded Slam Latch Assembly with 2 Flush Bolts. This assembly includes a center mechanism with a spring return and spring loade... more
SKU: 114-A-FO
Spring Loaded Slam Latch Assembly with 1 Flush Bolt and 1 Offset Bolt. This assembly includes a center mechanism with a spring return... more
SKU: 114-C
Center mechanism with spring return for 114 assembly
SKU: 114-B-F
Flush Latch Bolt with spring return to allow for slam action. This bolt is used with our 114AFF and 114AFO Slam Latch Assembly
SKU: 114-B-O
Offset Latch Bolt with spring return to allow for slam action. This bolt is used with our 114AOO and 114AFO Slam Latch Assembly
SKU: 114-ROD
This 36" rod is used with our 114 spring loaded slam latch assemblies. One side is flattened with a slot to allow for the slam action... more
SKU: 25-128
Shaft for inside release handles on quad bi-fold doors. Button end stops handle shaft from pulling out. longer shaft length stops sha... more
SKU: 107-COR
3 Point center mechanism with inside release override handle
SKU: 25-078
Center mechanism with override deadbolt latch used on rear and side swing doors on Supreme bodies.
SKU: 25-079
Inside release handle for 25-078 latch. Popular on Supreme bodies.
KEEP UP TO DATE
FOLLOW ALONG FOR SALES, EDUCATIONAL
VIDEOS, UPDATES, AND MORE! @millsupplyinc
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss
