Showing 1-50 of 50
SKU: 31-136
Gas Hood Shock, 20.25"L, for one piece front end that fits Utilimaster and Morgan Olson Route Star. Rated at 180 lbs. Does not includ... more
SKU: 31-134
Gas hood shock, non locking, 20.5" Extended, Uses 13mm ball stud (31-156) and is rated at 160 lbs. Popular on Morgan Olson Route Star.
SKU: 31-142
Locking Gas hood shock with pull style lock pin. 20-1/2", Fits into 13mm ball stud. Rated at 160 lbs
SKU: 31-162
Non locking gas hood shock, 17" extended length, Uses 10mm ball stud
SKU: 31-163
Gas Hood Shock, 20" extended length, Non Locking. Uses 10mm ball stud
SKU: 31-164
Gas Hood Shock, Locking, 20" extended length, Uses 10mm ball stud
SKU: 31-161
Gas Hood Shock, 26.5" extended length, Uses 10mm ball stud
SKU: 31-166
Gas Hood Shock, Locking, 26.5" extended length, Uses 10mm ball stud.
SKU: 31-154
Gas Hood Shock, 28" extended length, Uses 13mm ball stud
SKU: 31-155
Gas Hood Shock, 150 lbs., 28" extended length, Uses 13mm ball stud
SKU: 31-109
20" Locking Gas Hood Shock rated at 140 lbs pressure with 13mm ball stud ends. Includes the safety clips on ends. Popular on the newe... more
SKU: 31-132
Gas Hood Shock, 30.75" extended length, Non Locking, Uses 10mm ball stud.
SKU: 31-143
26.5" Non-locking Gas Hood Shock for Morgan Olson. Uses a 10mm ball stud.
SKU: 31-111
Non Locking Hood Gas Shock, 20.5" Extended - Used on newer Morgan Olson Stepvans
SKU: 31-141
26.5" Locking Hood Gas Shock for Morgan Olson. Uses a 10mm ball stud.
SKU: 29-312
Cast hood hinge with grease fitting for the one piece front end on a Morgan Olson body. This hinge requires shims and tap plates for ... more
SKU: 91617304
Tap Plate - This 2-hole tap plate measures 2-11/16" x 2" x 3/16" thick and has 2 threaded 5/16-18 holes at 1-1/2" spacing to fit your... more
SKU: 96717312
Mini Shim - This is a 1-hole shim that mounts in the upper section of the hinge under the hood. It measures 2" x 5/8" x 1/16" thick a... more
SKU: 99-367
Dog house aluminum engine cover. Fits many '96-on Route Star. It does not fit all models. See Note.
SKU: 35-905
Engine cover insulation with acoustic absorption, foil backed with adhesive on one side, 18" x 48" x 1".
SKU: 35-910
Engine cover insulation with acoustic absorption, foil backed with adhesive on one side, 48" x 48" x 1".
SKU: WF-1687
Winterfront, 19"H x 43"L; Complete with push button mounting hardware
SKU: 34-112
25 Foot roll of hood gasket weatherstrip for the Morgan Olson Route Star with a one-piece front End.
SKU: 32-336
10 Inch Rubber and Polymer Hood Catch / Draw Latch. 9" length in relaxed position. Keeps truck hoods secure while absorbing vibration... more
SKU: 75-250
Engine cover rubber bumper (black), 2-1/2" dia. x 1" recess with 3/8" hole.
SKU: 760364
This rubber socket is used for multiple application. It is used as a silent rubber socket door holder when used with the steel plunge... more
SKU: 94-820
Hood Guide and Receiver Plate - fits Morgan Route Star
SKU: 65-010-LH
Left headlight assembly with side marker lamp for the Morgan Olson with Freightliner chassis.
SKU: 65-010-RH
Right headlight assembly with side marker light for Morgan Olson with the Freightliner chassis
SKU: MHLE-07HILO
LED 7" Round Hi/Lo Dual Beam Head Light
SKU: M-50915
Headlight load equalizer for 7" round and 5 x 7 rectangular LED headlights, has 36" leads.
SKU: 65-007K
Two 7" Round Halogen Sealed High / Low Beams
SKU: 43-519
Pigtail for Flasher and High Low Beam
SKU: 65-002
7" High/Low Headlight with open back bucket with stainless steel retaining ring and chrome trim bezel. Uses standard 3 prong headligh... more
SKU: 65-003
7" High/Low Headlight with closed back bucket with stainless steel retaining ring. The bucket is galvanized and it uses a Weatherpack... more
SKU: 40002-Y
4" Standard yellow light kit with grommet and pigtail ( turn / park ) - Model 40
SKU: 486-A
3-3/16" Round yellow reflector - Mounts with one screw through center
SKU: 60002-Y
6-1/2" x 2-1/4" Oval park and Turn light, yellow, with grommet ( 60700 ) and 3 wire right angle plug ( 94993 ) - High impact polycarb... more
SKU: 60001-Y
6-1/2" x 2-1/4" Oval Turn Lamp - Yellow - 2 Wire Lamp with Grommet ( 60700 ) and Right Angle Plug ( 94992 ) - High impact polycarbona... more
SKU: 65-004
7" Conversion headlamp assembly that is a replacement for the original lamp on the Grumman Olson body with the Ford chassis. The orig... more
SKU: 65-004-K
7" Conversion headlamp assembly that is a replacement for the original lamp on the Grumman Olson body with the Ford chassis. The orig... more
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss