Showing 21-40 of 318
Electric 12V pump motor - twin post - Double stud motor to eliminate ground issues - Unique motor has 2 locations for drain - Motor c... more
"A" Valve - Has 1/2" stem with 3/8"-24 top thread. Uses 1/2" or 9/16" wrench to remove coil nut. Fits Meyer E-47, E-57 and E-60 power... more
A" Solenoid Valve & Coil Assembly Old Style. A 3/8" wrench size is used to remove top coil nut. Replaces Diamond & Meyer 15356
"C" coil that fits Meyer E-47 / E-57 and E-60 power units and has single green wire - Symptom of a faulty "C" coil is plow will not a... more
This product is a replacement 45" Hydraulic Hose with 1 Swivel, 1/4" Male NPT and 1/4" Quick Disconnect Hydraulic 2 piece coupler Kit... more
"A" solenoid includes new style valve and coil that replaces 15661 on E-47 / E-57 / E-60 power units - Coil has a single black wire a... more
"A" Valve - Has 3/8" stem with 10-32 top thread. A 3/8" wrench size is used to remove top nut. - Fits Meyer E-47 and some E-60 power ... more
This product is a replacement eye-bolt with two 5/8-11 nuts and lock washers.
"B" coil - fits Meyer E-47 / E-57 and E-60 power units - Has single red wire - Symptom of a faulty "B" coil is plow will not raise - ... more
This product is a replacement motor solenoid that is designed for use with the Meyer and Diamond line of snow plows.
A / B / C Coil Kit that fits Meyer E-47 / E-57 and E-60 power units and has single green, red and black wire. To check for a faulty c... more
Adjustable crossover relief valve for Meyer & Diamond E-47, E-57 and E-60 power units. The purpose of this valve is to hold the p... more
Top Pressure Relief Cap Kit - for Meyer E47, E58, E60, E60H
This product is a replacement lock nut that is designed for use with the E-58H, E-68, E-78, E-88 power units.
One Case of Low Temperature Hydraulic Fluid. Used with snow plows and liftgates. Twelve 1-Quart plastic bottles
This product is a replacement 90 degree tall rigid male elbow that is designed for use with the Diamond line of snow plows.
Rectangular halogen snow plow lamp kit with a 4" x 6" High/Low beam bulb in each lamp. Includes wiring harness with switch.
12 LED Amber White Low Profile Mini Strobe. The new M20389 warning series utilizes advanced 6 pod dual color class 1 diodes with 12 L... more
This product is a replacement quick disconnect 51" BLACK ground cable that is used with the dual plug disconnect coming off the pump ... more
Mill Supply carries a variety of parts that fit Diamond Snow Plows. Products include cutting edges, shoe assemblies, torsion and trip springs, blade guides, lift and angle cylinders, hoses and fittings, motors, battery connectors, cables, solenoid valve assemblies, hydraulic pump and fluid.
Diamond plows were started by people who left Fisher and are now owned by Meyer Products. The unique feature of the Diamond plow was the aggressive curve with a good trip edge. This heavy duty plow is a fine choice for the small business and independent snow plower. Originally they used under-the-hood hydraulic pumps to run the plows but that is no longer the case. They have adjustable spring tension which allows for much smoother trip action. Also the attack angle is much more versatile, providing good back dragging as well as good snow flow and ice peeling capabilities.