Description

1.5 Cubic Yard Electric Stainless Hopper Spreader - Conveyor Feed

• Designed for 1-ton trucks above 10,000 lb. GVW (gross vehicle weight).
• Available with 72 in. hopper with a capacity of 1.5 cubic yards.
• Conveyor and spinner powered by independent electric motors.
• Spreads bulk salt or a 50/50 salt/sand mix.
• In-cab controls with independent variable speeds for the conveyor and spinner.
• 14 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
• Versatile 12 in. chain conveyor drive.
• 12 in. adjustable height chute.
• High quality, 304 stainless steel construction for optimum corrosion resistance.
• Stainless steel inverted V improves flow and reduces stress on the drive line.
• Top screen included.
• Made in the USA.

1.5 Cubic Yard Electric Stainless Hopper Spreader is ready for commercial use. The 6 ft spreader can fit in the bed of a 1-ton truck and will work with bulk sand and a 50/50 sand/salt mix. Its electric-powered design offers quieter time-saving operation with no need for refueling or engine servicing. The spinner and conveyor are operated by a heavy duty in-cab controller with independent variable speeds. A stainless spreader is an investment made to last. Its hopper and fully welded frame are made from high quality 304 stainless steel for long lasting corrosion protection. The spreader features a 12 in. wide, all steel pintle chain conveyor powered by an independent 3/4 HP, 12V gear motor. A lever-operated feed gate offers additional material flow control. A six-fin, 14 in. polymer disc powered by an independent 1/2 HP, 12V motor can cast a 5 to 30 ft spread. The stainless-steel chute can be extended an extra 11-1/2 in. if needed. The spreader also comes outfitted with a top screen, stainless steel inverted V, and tie down kit.

Product Specifications:

• Chute Primary Material: 304 Stainless Steel
• Chute Standard Adjustable Extended: Adjustable Height
• Controller Type: High Current Variable Speed
• Drive Type: Electric
• Hopper Length: 72.00 "
• Hopper Material 304: Stainless Steel
• Number of Motors: 2
• Spinner Material: Polyurethane
• Works with Bagged #1 Rock Salt: Yes
• Works with Bulk Salt: Yes
• Works with Bulk Sand: Yes
• Works with Salt / Sand Mix: Yes
• Capacity: 1.50 cu yd
• Overall Height: 32.00"
• Overall Length: 87.30"
• Overall Width (at top): 47.00"
• Hopper Width: 47.00"
• Top Screen: Yes
• Drive Motor Horsepower: .75 HP
• Spinner Motor Horsepower: .50 HP
• Vibrator Included: No
• Spinner Diameter: 14.00"
• Spreading Width Range: 5' To 30'
• System Voltage: 12 VDC
• Feed Mechanism: Conveyor Chain
• Feed Mechanism 2: 12 in. Pintle Chain Conveyor

Tech Specs

• 1400701

Estimated Shipping Dimensions: 88" x 47" x 32"

Weight: 681.50 lbs