Description

2.0 Cubic Yard Electric Stainless Hopper Spreader - Conveyor Feed

• Fits extended bed 1-ton trucks with above 10,000 lb. GVW (gross vehicle weight).
• 96 in. stainless steel hopper with a 2 cubic yard capacity.
• Conveyor and spinner powered by independent electric motors.
• Spreads bulk salt or a 50/50 salt/sand mix.
• In-cab controls with independent variable speeds for the conveyor and spinner.
• 14 in. poly spinner broadcasts up to 30 ft
• 12 in. chain conveyor drive.
• Chute is adjustable up to 11-1/2 in.
• High quality 304 stainless steel construction for optimum corrosion resistance.
• Stainless steel inverted V improves flow and reduces stress on the drive line.
• Top screen and tie downs included.
• Made in the USA.

2.0 Cubic Yard Electric Stainless Hopper Spreader is ready for commercial use. The 8 ft spreader can fit in the back of an extended-bed 1 ton truck and will work with bulk salt or a 50/50 salt/sand mix. Its electric-powered design means quieter operation with no need for refueling or engine servicing. The hopper and fully welded frame is made from long lasting, corrosion resistant 304 stainless steel. A 12 in. wide, all steel pintle chain conveyor provides high speed material flow with its independent 3/4 HP, 12V gear motor. A lever-operated feed gate offers additional material flow control. A six-fin, 14 in. poly spinner powered by an independent 1/2 HP, 12V motor can cast material 5-30 ft. The stainless-steel chute can be extended an extra 11-1/2 in. if needed. The spreader is operated by an intuitive heavy duty in-cab controller with independent spinner and conveyor speeds. The spreader also comes outfitted with a top screen, stainless steel inverted V, and tie down kit.

Product Common Use: Parking Lots, Driveways, Commercial Property Maintenance, Residential Upkeep

Product Specifications:

• Chute Primary Material: 304 Stainless Steel
• Chute Standard Adjustable Extended: Adjustable Height
• Controller Type: High Current Variable Speed
• Drive Type: Electric
• Hopper Color: Black
• Hopper Length: 96.00"
• Hopper Material: 304 Stainless Steel
• Number of Motors: 2
• Spinner Material: Polyurethane
• Works with Bagged #1 Rock Salt: Yes
• Works with Bulk Salt: Yes
• Works with Bulk Sand: Yes
• Works with Salt / Sand Mix: Yes
• Capacity: 2.0 cu yd
• Overall Height: 32.00"
• Overall Length: 110.80"
• Overall Width (at top): 47.00"
• Hopper Width: 47.00"
• Top Screen: Yes
• Drive Motor Horsepower: .75 HP
• Spinner Motor Horsepower: .50 HP
• Vibrator Included: No
• Spinner Diameter: 14.00"
• Spreading Width Range: 5' To 30'
• System Voltage: 12 VDC
• Feed Mechanism: Conveyor Chain
• Feed Mechanism 2: 12 in. Pintle Chain Conveyor

Tech Specs

Estimated Shipping Dimensions: 111" x 47" x 32"

Weight: 995.00 lbs