Description

90"W x 82"H Replacement roll-up door for trucks with 1" rollers or Todco style doors. Can be cut down to 86"W x 76"H. This door is 80% pre-assembled. Hinges are purposely not installed on one side and the top of the door, so when trimmed to a smaller size, your hinges and rollers will install with minimal effort.

Includes:
Door panels are Painted White, 7 ply, 3/4" top quality, medium density overlaid hardwood-faced plywood manufactured with a 2 step layup and waterproof glue bond. Top panel and one complete side can be cut to match original door. Top panel can be cut down to a minimum of 9" tall and one complete side can be trimmed up to 4" to match original door.

• Pre-Painted white
• 1" rollers
• Tongue-and-groove joints
• Head and bottom seals
• 4 vertical rows of hinges (not attached on one side so door can be trimmed up to 4").
• Stainless Steel cables and hardware fasteners. Eliminates rust streaks on your new door!
• Todco style lock. Click here to see this lock.
• Lift handle
• 18" looped pull strap
• All door hardware is zinc plated
• Maximum security latch (not attached)
• Does not include track

90"W x 82"H Doors includes four painted white 15" panels and two 11" top panel plus all hardware as noted above, less counterbalance and track. Order your counterbalance separately, see below.

Please Note:
Top and bottom seals are included, side seals are not, click here to see our side seals.

The counterbalance spring assembly for this Todco style door is not included. If you need one, order 20-7085.

Rivets are provided to complete this door assembly. To install the rivets with an air hammer, you need a Rivet Set Tool (Part: 20-7091) . If you prefer not to use rivets, you can order our package of stainless steel bolts and nuts (Part: 20-7090).

Installation Instructions in PDF

Tech Specs

Estimated Shipping Dimensions: 92" x 47" x 5"

Weight: 153.00 lbs