Showing 41-60 of 201
Part Number: 48-173
3 post grounded solenoid with curved base positive to excite
Part Number: 48-061
4 Pole socket with split pins
Part Number: 48-069
Remote or screw mount push button switch, wired with 10 foot 16/3 cable
Part Number: 155-0804
"A" Valve. Has 3/8" stem with 10-32 top thread.
Part Number: 48-172
4 post insulated solenoid with curved base
Part Number: 48-435
Liftgate motor, OEM Fenner, regular duty, 12V splined shaft - CW, same as 48-415 but economy value line replacement motor.
Part Number: 48-046
3 post grounded solenoid with flat base and positive to excite
Part Number: 48-192
Coil only, single terminal, for cartridge drain solenoid valve. Replaces Maxon: 250071; Thieman: 4413.
Part Number: 48-177
4-Post bear solenoid, 12V continuous duty
Part Number: 48-077
Toggle switch, 3 blade terminals
Part Number: 43-519
Pigtail for Flasher & High Low Beam
Part Number: 48-082
Remote control switch, 3-wire control with 10 ft cable. Rugged A.B.S. plastic, sealed, two magnets for easy mounting.
Part Number: 48-471
Liftgate motor, 12V thermal protected liftgate motor, single post with tang, CCW
Part Number: 44-890
3 Blade electronically controlled 12V flasher. Used with incandescent to LED loads. External wire provides ground
Part Number: 48-326
Reservoir, plastic, for Fenner unit: Dimensions: 6-3/4" x 7-1/4" x 13", 2-1/2 gallon capacity.
Part Number: 48-054
Permanent mount toggle box, without cable. Includes momentary 3 terminal toggle switch
Part Number: 48-094
Weatherproof remote control switch, wired with 16/3 retractile cord.
Part Number: 48-074
Cut off safety switch
Part Number: 48-060
4 Pole plug with cable clamp and spring protector
Part Number: 48-065
Stationary mount push button switch with rubber cap, 2 terminal