Showing 1-20 of 51
SKU: M-5030-12V
Auxiliary Wall or Floor Mount Heater Assembly, 12,500 BTU, 12 VDC, 200 CFM
SKU: 55-009
Universal floor / under dash mount heater, 9" plastic stroker heater grille face, 26,000 BTU 200 CFM 12VDC
SKU: 52-052
Aluminum Fan Blade, 6-1/2". (See chart above)
SKU: M-8030-12V
25,000 BTU Auxiliary Wall or Floor Mount Heater Assembly with a rated air movement of 250 cfm. Includes a dash mount 3-speed switch. ... more
SKU: 55-390
High Output 30,000 BTU 12 Volt Auxiliary Heater with mounting brackets, switch, and 5/8" hose connectors. This unit uses a single mot... more
SKU: 51-156
Heater Motor, 2-Speed, 12 Volt, Dim: 3" dia. x 3.27" L with 5/16" Dia. x 1" L shaft, CW - Fits auxiliary heater assembly 55-344
SKU: 51-155
Heater Motor, 1 Speed Wire Wound, 12 Volt, 2 wires - Dim: 3-1/4" L x 3" Dia. with 1/4" x 5/8" L shaft, CCW
SKU: HK-5001
Heater installation kit, Includes, 126" heater hose, one water shut-off valve, two "Y" splicers, eight hose clamps
SKU: M-5030-24V
Auxiliary Wall or Floor Mount Heater Assembly, 12,500 BTU, 24 VDC, 200 CFM
SKU: 51-182
Heater Motor, 3 Speed, 12 Volt, 3 wires, Dim: 3" x 3-1/4" with 1/4" Shaft Dia. Fits our auxiliary heater assemblies M-5030-12V & ... more
SKU: 51-151
Heater Motor, 1 Speed Wire Wound, 12 Volt, 2 wires, CCW rotation. Dim: 2-3/4" L x 3" Dia. with 1/4" x 1" Shaft. Fits Hupp auxiliary h... more
SKU: B-448
Dual wheel blower assembly. 12 Volt, 3-speeds; uses one motor with dual shafts.
SKU: 55-350
22,000 BTU Auxiliary Heater with Defrost or Direct Vent Capability. Can be used where ever extra heat is needed in trucks as well as ... more
SKU: 55-380
Single wheel assembly with 3-Speed motor. This blower is ideal for small application. Only has a 9" x 5" footprint with a vent openin... more
SKU: 55-110
Dual wheel blower assembly - 12 Volt permanent magnet motor with 4 speeds operated from a resistor - Uses dual shaft motor
SKU: 51-163
Heater motor, 24 Volt, 2 wires, 1 speed, wire wound, CCW - Dim: 3-1/2" L x 3" Dia. with 1/4" x 1" Shaft.
SKU: 51-232
Heater motor, 3 Speed, 12 Volt, wire wound, 3 wires on plug and 1 ground - Dim: 3-3/4"L x 3" dia; 5/16" x 3-1/8"L double shafts.
SKU: 53-655
Switch for 55-322, 55-324, M-5000 and M-8000 -12/24V heater assemblies.
SKU: 55-392
High Output 30,000 BTU 24 Volt Auxiliary Heater with mounting brackets, switch, and hose connectors. This unit uses a single mot... more
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss