Showing 61-80 of 149
Part Number: 81-932
2" Diameter x 4" Long Diesel Fuel Filler Neck with 5/8" diameter vent and angled mounting flange.
Part Number: 81-993
1-5/8" I.D. x 36" Flexible filler hose.
Part Number: 81-919
Upper fuel tank strap for the 40 gallon fuel tank used on the 2004-on Workhorse chassis
Part Number: 81-927
40 Gallon Diesel Fuel Tank with small 5 hole mount fuel gauge hole. The hole in the tank for the fuel gauge measure 1-5/8". This tank... more
Part Number: 81-952
Fuel tank, 35 gallon, that fits Freightliner MT 35 up to 2002. Also fits John-Deere and Oshkosh. This replaces the original tank that... more
Part Number: 81-967
Unleaded Gas Filler Neck with non-locking fuel cap. Filler tube reduces down to 1-1/2" and has a 3/4" vent tube. Use with 81-993 flex... more
Part Number: 81-990
Sending unit only for 81-914 tank, includes rubber hose cap for extra line not needed.
Part Number: 81-912
30 Gallon Fuel Tank that fits 1980-81 GM P-Chassis. It has a 90 degree filler pipe on top, 10" from front side of tank. Be sure to ch... more
Part Number: 81-909
T-Bolt for the straps on the 40 gallon fuel tank on the Workhorse chassis
Part Number: 81-352
Fuel filter adapter and filter. Fits 2003 and newer Workhorse.
Part Number: 81-814
Fuel sender & pump for the Freightliner MT45 and MT55; 6.0L Vortec V8 Gas engine. Includes rubber O-ring.
Part Number: 81-098
Unleaded fuel cap. Only fits Mill filler neck numbers: 81939, 81967, 81983.
Part Number: 81-946
32-1/2" Fuel tank strap for 12" high tank shown on this page. If you have a 14" high tank use 81-949.
Part Number: 81-998
Flexible Filler Hose. 2" inside diameter x 36" length.
Part Number: 81-939
1-3/4" x 6" Unleaded fuel filler neck with green cap. This filler neck reduces from 2" at the filler cap to 1-3/4" where the hose wou... more
Part Number: 81-929
2" O.D. 90 Degree fill elbow fits universal fuel filler necks.
Part Number: 99-1200
Fuel line replacement kit makes repairs quick and profitable, Has 52 pieces total with 15 ft. of 5/16" nylon line and 15 ft. of 3/8" ... more
Part Number: 81-913
Locking gas cap that fits Oshkosh, Freightliner MT45, and Workhorse chassis 98-on.
Fuel tanks have been a focus of Mill Supply as of late. We are constantly updating and adding to our current product lines to try and better serve our customers. Several of our fuel tanks are manufactured for Mill Supply. They are made with the same dimensions as the outside as the original tanks but are superior in construction compared to the original tanks. We also carry fuel tank straps and sending units.
..The outside of our tanks are treated with Corsol to provide the best in anti-corrosive metal treatment. Corsol is an extremely stable water based electrochemical that prevents corrosion. It stands up extremely well in automotive applications with high anti-corrosive properties and is galvanically non-conductive, allowing dissimilar metals to be fastened together without concern for accelerated galvanic corrosion around joining surfaces.
..Our tanks are Aluminized which is unaffected by diesel fuel. Diesel fuel is not always absent of water and particulate contamination, allowing an all steel tank to corrode on the inside. Aluminum is metallurgically bonded to the steel by hot dipping; it protects the steel by not allowing water contamination to penetrate into the steel tank.
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies.
