Showing 1-20 of 65
SKU: 155-9050
10' x 6" x 1/2" High carbon steel cutting edge blade, top punch has 12 mounting holes. - 120"L x 1/2"W x 6"H - Fits Meyer M-10
SKU: 155-9035
8' High carbon steel cutting edge blade, top punch has 8 mounting holes. 1/2" thick heavy-duty - 96"L x 1/2"W x 6"H - Fits Meyer C-8
SKU: 155-9045
9' (108") x 6" x 1/2" High Carbon Steel Cutting Edge Highway Punch Blade with 11 mounting holes - Meyer C-9/HM-9 & Fisher HD2/HDX
SKU: 155-9030
7.5' High carbon steel cutting edge blade, top punch has 8 mounting holes. 1/2" thick heavy-duty that is designed for use with the Me... more
SKU: 155-9025
7.5' Steel cutting edge blade, top punch 8 mounting holes for 1/2" bolt - 90"L x 3/8"W x 6"H - Fits Meyer ST-7.5 and C-7.5.
SKU: 155-9030-K
7.5' High carbon steel cutting edge blade, top punch. 1/2" thick heavy-duty, 90"L x 1/2"W x 6"H that is designed for use with the Mey... more
SKU: 155-0080
5/8" x 2.5" Grade 5 carriage bolts & Nylox nuts - Set of 12. Used on 324-9005, 324-9010 & 324-9015 cutting edges.
SKU: 155-9035-K
8' High carbon steel cutting edge blade, top punch has 8 mounting holes. 1/2" thick heavy-duty - 96"L x 1/2"W x 6"H - Fits Meyer C-8
SKU: RB-815
Custom rubber cutting edge without holes, 8" Tall x 1-1/2" Thick x Your specified length. There are NO slotted holes drilled in this ... more
SKU: 155-9025-K
7.5' High Carbon Steel cutting edge blade, top punch 8 mounting holes for 1/2" bolt - 90"L x 3/8"W x 6"H - Fits Meyer ST-90
SKU: 155-0078
Set Of 8 Grade 5 Cutting Edge Bolts & Nylox Lock Nuts. For Blizzard, Curtis, Meyer, SnoWay, and Western.
SKU: 256-0652
6" x 6" Carbide Universal Anti-Wear Plate
SKU: RB-1015
Custom rubber cutting edge without holes, 10" Tall x 1-1/2" Thick x Your specified length. There are NO slotted holes drilled in this... more
SKU: 155-1510
Extend life to your cutting edge and reduce blade changes with our 15" x 6" Carbide Wear Plate that is pre-punched for 1/2" bolts. Th... more
SKU: 155-9045-K
9' High carbon steel cutting edge blade, top punch has 11 mounting holes with hardware kit - 108"L x 1/2"W x 6"H - Replaces Fisher 55... more
SKU: 153-0127
Carbide cutting edge guard XTendor is designed with 5/8" square and rectangular holes that have a 2-1/2" to 3-1/2" center to center s... more
SKU: 155-9002
High Carbon Steel Cutting Edge Half Blade for 8.5 V-Plow. Has 7 Mounting Holes 5/8", center punch - Dim: 48" x 6" x 1/2" - Replaces M... more
SKU: 155-0601
Extend life to your cutting edge and reduce blade changes with our 6 x 6" Carbide Wear Plate that is pre-punched for 1/2" bolts. Thes... more
SKU: 155-9020
7' High Carbon Steel Cutting Edge Blade, Top Punch has 7 Mounting Holes for 1/2" Bolt, 84"L x 3/8"W x 6"H - Fits Meyer ST-84 plows.
SKU: 155-0075
1/2" x 2" Grade 5 cutting edge carriage bolts & Nylox nuts, set of 10. Can be used on cutting edges for Meyer, Boss, Curtis, Fish... more
Mill Supply, Inc. carries a variety of high-carbon steel cutting edges to fit the Meyer Snow Plows. These replacement high-carbon steel cutting edges have high wear resistance due to superior surface hardness. Most of our cutting edges can be shipped out to our customers the same day by U.P.S. or, if you are ordering more than one it would be advantageous to ship by freight. Cutting edges that fit Meyer Plows have pre-punched holes and will replace your existing cutting edge with minimal effort. Mill Supply has cutting edges to replace the Meyer; Two Meter 78", ST-72, ST-78, ST-84, ST-90, C-8, C-8.5, M-9, and M-10. Most cutting edges are 3/8" thick but the ST-90, our 90" cutting edge with 8 holes, is also available in 1/2" thick.
Order your cutting edge Bolts and Nuts Separate. Mill Supply has packaged cutting edge bolts in quantities of 6, 8, 9 and 12. Be sure to add this carriage bolt set, with locking nuts included, when you order your cutting edge.
KEEP UP TO DATE
FOLLOW ALONG FOR SALES, EDUCATIONAL
VIDEOS, UPDATES, AND MORE! @millsupplyinc
Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss
