LED Snow Plow Headlight Set with plug for Nite Saber wiring harness. Has an integrated heat grid built in to stop snow and ice build up.
Dimensions: 12.5"W x 4.9"H x 8.1"D
Operating Voltage: 12Vdc
Operating Current: Low Beam: 1.0A @ 12Vdc | High Beam: 1.3A @ 12Vdc | Heat Grid: 1.0A @ 12Vdc
Power Consumption: Low Beam: 12W | High Beam: 16W | Heat Grid: 12W (Maximum 24W)
Heat Grid: Activated with Low Beam and/or High Beam at Temperatures Below +5°C
Temperature Range: -40°C to +65°C
Ingress Protection: IP68 & IP69K
Weight: 5.5lbs (2.5kg)
Connection: Universal Wire Harness
Polarity: Reverse Voltage Protected
Vibration Resistance: 10-500Hz @ 5Grms
Compliance: FMVSS108 and CMVSS108
Estimated Shipping Dimensions: 15" x 12" x 11"
Weight: 13.00 lbs
We realize that the longer your snow plow is out of commission, the less money you make. Our goal is to keep you up and running so your customers are pleased with the job you do. However, we all know that cold weather can wreak havoc on outside equipment and you can only make money if your snow plow is in working order. Most of the time it is a quick fix like a cracked hose, or a broken spring; but this is not always the case and you can count on Mill Supply to help you in those harder times too. Mill Supply has been selling snow plow parts since 1986. Many in our sales staff have been on-the-job for over 30 years. With that kind of knowledge you can be assured that we can assist you with your questions and get the right parts sent out right away. Most orders placed before 3:00 PM EST will get shipped out the same day. So if your Meyer, Western, Boss, Fisher, or other snow plow needs some maintenance, order today! If you're unsure as to what exactly you need, you can either contact us via email or give us a call at 800-888-5072 between 8:00 a.m. - 5:00 p.m. E.S.T. and one of our experienced representatives will be happy to help you.