Description

Hat Shaped 10 Hole Rotor - 3.21" Overall Height - Fits Workhorse W20, W21, W22

Product Specifications:

Brake Rotor Casting Type: Vented
Brake Rotor Diameter, Outer: 15.000 in / 381.000 mm
Brake Rotor Thickness, Discard: 1.320 in / 33.528 mm
Brake Rotor Thickness, Nominal: 1.435 in / 36.449 mm
Brake Rotor Type:Conventional
Center Hole Diameter, Minimum: 6.003 in / 152.476 mm
Height, Overall: 3.210 in / 81.534 mm
Performance Level: Standard Performance
Surface Finish: Plain
Packaged Weight: 38.5000 lb
Wheel Bolt Circle Diameter: 7.250 in / 184.150 mm
Wheel Bolt Hole Diameter, Maximum: 0.588 in / 14.935 mm
Wheel Bolt Hole Diameter, Minimum: 0.578 in / 14.681 mm
Wheel Bolt Holes, Primary: 10

Vehicles:

• International 1452SC 1987-1992 Rear
• International 1652SC 1994-1998 Front
• International 3600 1993 Front 1994-1997 Front, Rear
• International 3700 1993 Front 1994 Front, Rear
• International 3800 1993-1997 Front
• International 3900FC 1993-1994 Front
• International 4600 1994-1995 Front
• International 4600LP 1994 Front
• International 4700 1994-1997 Front
• International 4700LP 1994-1997 Front
• International 4700LPX 1996-1997 Front
• International 4800 1994-1997 Front
• International 4900 1994-1997 Front
• International 7100 1990-1993 Rear 1994-1995 Front, Rear
• International M1400 Metro II 1987-1989 Rear
• Sterling Truck Acterra 5500 2001-2006 Front, Rear
• Sterling Truck L7500 2002-2006 Front, Rear
• Workhorse Custom Chassis W22 2001-2009 Front, Rear
• Workhorse W20 2001-2009 Front, Rear
• Workhorse W21 2007-2009 Front, Rear
• Workhorse W22 2001-2009 Front, Rear

Tech Specs