3.5 Cu.Yd. Gas Engine Conveyor Chain Municipal Hopper Spreader - Buyers SaltDogg

SKU: 14708F461211

3.5 Cu.Yd. Gas Engine Conveyor Chain Municipal Hopper Spreader - Buyers SaltDogg

SKU: 14708F461211

Estimated to ship in 3-5 days from closest warehouse!


3.5 Cubic Yard Gas Engine Conveyor Chain Stainless Steel Hopper Spreader. For trucks with a minimum of 15,000 lbs. - GVW. 12-gauge 304 Stainless Steel with continuously welded seams. 96" Overall length.

Buyers Products SaltDogg 3.5 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader powered by 10-1/2 HP Briggs and Stratton Intek Industrial/Commercial gas engine, with in-cab electric start throttle control. The spreader combines the power of a gas engine with modern spreader conveniences. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis, depending on size of spreader.

The highly corrosion-resistant 304 stainless steel hopper features a fully welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 14-1/2 in. wide, high-flow, steel pintle chain conveyor has 1/4 in. crossbars and a stainless-steel floor. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on startup. A SaltDogg Spreader is built to last. A stainless-steel inverted V reduces stress on the drive line to improve material flow. An adjustable feed gate with lock pin offers additional material flow control.

The spreader comes equipped with a 12V electric clutch and in-cab, three position momentary switch and throttle. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

Spreader is shown with optional light bar (8891144) and pre-wet system (LS1) which are sold separately.

Spread Material: bulk salt, bulk sand, salt & sand mix
Feed Mechanism: 14-1/2" wide conveyor chain with 1/4" crossbars
Power Source: gasoline or hydraulic

  • Capacity: 3.5 cu. yds. (8')
  • 304 stainless steel hopper
  • Adjustable Feed gate
  • Available with 10-1/2 HP gas engine or 2 independent hydraulic motors
  • 14-1/2" wide conveyor chain with 1/4" crossbars
  • Spinner chute has two adjustable internal baffles
  • 4 Hinged top screens, 1/4" bars
  • Inverted V
  • Bolt-on spinner housing
  • 18" Spinner disc


3.5 Cubic Yards




Stainless Steel


In-Cab Control Console



Feed Mechanism

14.5"W Conveyor Chain

Hopper Dimensions

45" x 70" x 96"

Hopper Length


Ideal Use

Municipal & Commercial


1400475SS (Old Number)

Overall Height


Overall Width


Power Source

10.5 HP Briggs & Stratton Intek Gas Engine



Spreading Material

Bulk Salt; 50/50 Salt/Sand mix

Spreading Width

4-30 ft.

Top Screen

(4) 1/4" Black Powder Coated Steel

Vehicle Application

GVW Chassis of 15,000 - 26,000 lbs.

Product Manual

Tech Specs

OEM/Other Numbers:
  • 14708F461211
  • 1400475SS

Estimated Shipping Dimensions: 116" x 70" x 45"

Weight: 1470.00 lbs

We realize that the longer your snow plow is out of commission, the less money you make. Our goal is to keep you up and running so your customers are pleased with the job you do. However, we all know that cold weather can wreak havoc on outside equipment and you can only make money if your snow plow is in working order. Most of the time it is a quick fix like a cracked hose, or a broken spring; but this is not always the case and you can count on Mill Supply to help you in those harder times too. Mill Supply has been selling snow plow parts since 1986. Many in our sales staff have been on-the-job for over 30 years. With that kind of knowledge you can be assured that we can assist you with your questions and get the right parts sent out right away. Most orders placed before 3:00 PM EST will get shipped out the same day. So if your Meyer, Western, Boss, Fisher, Buyers, SAM, SnowDogg or other snow plow needs some maintenance, order today! If you're unsure as to what exactly you need, you can either contact us via email or give us a call at 800-888-5072 between 8:00 a.m. - 5:00 p.m. E.S.T. and one of our experienced representatives will be happy to help you.



VIDEOS, UPDATES, AND MORE! @millsupplyinc

Mon-Fri 8AM - 5PM EDT
Copyright ©2024 Mill Supply, Inc. ec
Mill Supply, Inc. 19801 Miles Rd. Cleveland, OH 44128

Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss