6.0 Cubic Yard Electric Poly Hopper Spreader - Auger Feed


6.0 Cubic Yard Electric Poly Hopper Spreader - Auger Feed


Out of Stock! Factory backordered until approximately 07/01/24


6.0 Cubic Yard Electric Poly Hopper Spreader - Auger Feed

  • Works with dump trucks and flatbeds with minimum 25,999 lb GVW (gross vehicle weight).
  • Durable poly hopper with stainless steel frame and trough.
  • 12V DC-powered electric drive with independent 3/4 HP auger/chain motor, and 1/2 HP spinner motor.
  • Auger model can drive bulk salt or a 50/50 sand/salt mix.
  • In-cab closed-loop controller with independent conveyor/auger and spinner speeds, with vibrator control.
  • 14in. spinner broadcasts material up to 30 ft
  • Available in both variable pitch full length auger and high flow pintle chain models.
  • Vibrator, Top screens, inverted V, and remote auger bearing grease kit included.
  • Vinyl tarp kit and spreader tie downs sold separately
  • Backed with a 2 year warranty.
  • Made in the USA.

Product Overview:

Electric Poly Hopper Spreader gives contractors, property managers, and municipalities a powerful 6 cubic yard spreader for commercial and municipal use. The high flow pintle chain conveyor can drive bulk salt or a 50/50 salt/sand mix at a flow rate of 600 lb per minute. The spreader works with dump trucks and flatbeds with a minimum 25,999 GVW (gross vehicle weight). Its electric-powered design means quieter operation with no need for refueling or engine servicing, giving you more time on the road.

The patented double-wall poly hopper is supported by a corrosion-resistant stainless steel frame and includes two steel top screens to help break up clumps of material during bulk loading. It features a 6 in. steel variable pitch auger with a stainless steel trough. An independent 3/4 HP motor powers the auger. The included inverted V and 900 lb vibrator help break up clumps and keep material flowing. A 14 in. polymer spinner, powered by an independent 1/2 HP, 12V motor, spreads material 5 to 30 ft.

The SHPE6000CH features a chute with an open trough and stainless steel spinner shield. The spinner assembly can be easily removed for cleaning and storage. The vibrator and independent conveyor and spinner speeds are controlled by an in-cab controller.

A remote auger bearing grease kit is included . Vinyl tarp kit and tie down kit sold separately.
Product Common Use: Industrial Parking Lots, Commercial Properties, Apartment Complexes

Product Specifications:

  • Chute Primary Material: Polyethylene
  • Chute Standard Adjustable Extended: Adjustable Height
  • Controller Type: High Current Variable Speed
  • Drive Type: Electric
  • Frame Material: 304 Stainless Steel
  • Hopper Color: Black
  • Hopper Length: 133.50"
  • Hopper Material: Polyethylene
  • Number of Motors: 2
  • Spinner Material: Polyurethane
  • Trough Material: 304 Stainless Steel
  • Works with Bagged #1 Rock Salt: Yes
  • Works with Bulk Salt: Yes
  • Works with Bulk Sand: No
  • Works with Salt / Sand Mix: Yes
  • Capacity: 6.00 yd
  • Overall Height: 57.00"
  • Overall Length: 133.50"
  • Overall Width (at top): 77.00"
  • Hopper Width: 77.00"
  • Top Screen: Yes
  • Drive Motor Horse Power: .75 HP
  • Spinner Motor Horse Power: .75 HP
  • Vibrator Included: Yes
  • Vibrator Force: 900 lb
  • Spinner Diameter: 14.00"
  • Spreading Width Range: 5 To 30'
  • System Voltage: 12 VDC
  • Feed Mechanism: Full Length Auger
  • Feed Mechanism 2: 6" Auger

Tech Specs

OEM/Other Numbers:
  • SHPE6000

Estimated Shipping Dimensions: 134" x 77" x 57"

We realize that the longer your snow plow is out of commission, the less money you make. Our goal is to keep you up and running so your customers are pleased with the job you do. However, we all know that cold weather can wreak havoc on outside equipment and you can only make money if your snow plow is in working order. Most of the time it is a quick fix like a cracked hose, or a broken spring; but this is not always the case and you can count on Mill Supply to help you in those harder times too. Mill Supply has been selling snow plow parts since 1986. Many in our sales staff have been on-the-job for over 30 years. With that kind of knowledge you can be assured that we can assist you with your questions and get the right parts sent out right away. Most orders placed before 3:00 PM EST will get shipped out the same day. So if your Meyer, Western, Boss, Fisher, Buyers, SAM, SnowDogg or other snow plow needs some maintenance, order today! If you're unsure as to what exactly you need, you can either contact us via email or give us a call at 800-888-5072 between 8:00 a.m. - 5:00 p.m. E.S.T. and one of our experienced representatives will be happy to help you.



VIDEOS, UPDATES, AND MORE! @millsupplyinc

Mon-Fri 8AM - 5PM EDT
Copyright ©2024 Mill Supply, Inc. ec
Mill Supply, Inc. 19801 Miles Rd. Cleveland, OH 44128

Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss