5.0 Cu.Yd. Gas Engine Conveyor Chain Municipal Hopper Spreader - Buyers SaltDogg

SKU: 14709F521211

5.0 Cu.Yd. Gas Engine Conveyor Chain Municipal Hopper Spreader - Buyers SaltDogg

SKU: 14709F521211
$13776.80

Estimated to ship in 3-5 days from closest warehouse!

Description

5.0 Cubic Yard Gas Engine Conveyor Chain Mid-Size Stainless Steel Hopper Spreader. 108" Hopper length. For trucks with a minimum 19,500 lbs. GVW.

  • Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight).
  • High quality, 304 stainless steel construction for optimum corrosion resistance.
  • Powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with an included battery for electric start.
  • Spreads bulk salt, bulk sand, or a 50/50 salt/sand mix.
  • In-cab controls with independent variable speeds for the conveyor and spinner.
  • 18 in. poly spinner broadcasts up to 30 ft.
  • Versatile 14-1/2 in. chain conveyor drive with 1/4 in. crossbars.
  • Two chute baffles allow you to adjust the spread pattern to your use.
  • Stainless steel inverted V reduces stress on the drive line and improves flow.
  • Four hinged top screens with 1/4 in. bars included.
  • Spreader is shown with optional light bar (8891144), and pre-wet system (LS1) which are sold separately.
  • Made in the USA.

Buyers Products SaltDogg 5.0 Cubic Yard Hydraulic Conveyor Chain Spreader gives contractors and municipalities a heavy duty, durable spreader powered by 10-1/2 HP Briggs and Stratton Intek Industrial/Commercial gas engine, with in-cab electric start throttle control. The spreader combines the power of a gas engine with modern spreader conveniences. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix. The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis, depending on size of spreader.

The highly corrosion-resistant 304 stainless steel hopper features a fully welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 14-1/2 in. wide, high-flow, steel pintle chain conveyor has 1/4 in. crossbars and a stainless-steel floor. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on startup. A SaltDogg Spreader is built to last. A stainless-steel inverted V reduces stress on the drive line to improve material flow. An adjustable feed gate with lock pin offers additional material flow control.

The spreader comes equipped with a 12V electric clutch and in-cab, three position momentary switch and throttle. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

Spreader is shown with optional light bar (8891144) and pre-wet system (LS1) which are sold separately.

Product Common Use: Salt Spreaders, Municipal Spreaders, Road and Highway Maintenance

Product Details:

  • Chute Primary Material: 304 Stainless Steel
  • Chute Standard Adjustable Extended: Adjustable Height
  • Controller Type: In-Cab Throttle/Choke
  • Drive Type: Gas
  • Hopper Length: 108.00"
  • Hopper Material: 304 Stainless Steel
  • Number of Motors: 1
  • Spinner Material: Polyurethane
  • Works with Bagged #1 Rock Salt: Yes
  • Works with Bulk Salt: Yes
  • Works with Bulk Sand: Yes
  • Works with Salt / Sand Mix: Yes
  • Overall Height: 52.00"
  • Overall Length: 128.00"
  • Overall Width (at top): 70.00"
  • Hopper Width: 70.00"
  • Top Screen: Yes
  • Vibrator Included: No
  • Spinner Diameter: 18.00"
  • Spreading Width Range: 2 To 40'
  • Feed Mechanism: Conveyor Chain
  • Feed Mechanism 2: 14-1/2" Pintle Chain with 1/4" Bars

Tech Specs

OEM/Other Numbers:
  • 1400505SS
  • 14709F521211

Estimated Shipping Dimensions: 128" x 70" x 52"

Weight: 1907.00 lbs

We realize that the longer your snow plow is out of commission, the less money you make. Our goal is to keep you up and running so your customers are pleased with the job you do. However, we all know that cold weather can wreak havoc on outside equipment and you can only make money if your snow plow is in working order. Most of the time it is a quick fix like a cracked hose, or a broken spring; but this is not always the case and you can count on Mill Supply to help you in those harder times too. Mill Supply has been selling snow plow parts since 1986. Many in our sales staff have been on-the-job for over 30 years. With that kind of knowledge you can be assured that we can assist you with your questions and get the right parts sent out right away. Most orders placed before 3:00 PM EST will get shipped out the same day. So if your Meyer, Western, Boss, Fisher, Buyers, SAM, SnowDogg or other snow plow needs some maintenance, order today! If you're unsure as to what exactly you need, you can either contact us via email or give us a call at 800-888-5072 between 8:00 a.m. - 5:00 p.m. E.S.T. and one of our experienced representatives will be happy to help you.

KEEP UP TO DATE

FOLLOW ALONG FOR SALES, EDUCATIONAL

VIDEOS, UPDATES, AND MORE! @millsupplyinc

Mon-Fri 8AM - 5PM EST
Copyright ©2024 Mill Supply, Inc. ec
Mill Supply, Inc. 19801 Miles Rd. Cleveland, OH 44128

Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss