Description

5.5 Cubic Yard Hydraulic Auger Feed Mid-Size Stainless Steel Hopper Spreader. 120" Hopper length. For trucks with a minimum 15,000 lbs. GVW.

• Designed for dump bodies and flatbeds with a minimum 15,000 GVW.
• Durable 304 stainless steel hopper for superior corrosion resistance.
• Powered by two independent hydraulic motors for auger and spinner.
• Spreads bulk salt or a 50/50 sand/salt mix.
• Hydraulic controls sold separately.
• 18 in. poly spinner with six fins broadcasts up to 30 ft.
• 5-1/4 inch variable pitch auger with a 304 stainless steel adjustable inverted V for optimum corrosion resistance and to improve flow and reduce stress on the drive line.
• 12 inch adjustable height swing-away spinner chute has three adjustable internal baffles and quick detach pins for convenient bulk unload, easy servicing, and access to towing.
• Four hinged top screens with 1/4 inch diameter bars included.
• Made in the U.S.A.

Buyers Products SaltDogg 3.5-5.5 Cubic Yard Hydraulic Auger Spreader gives contractors and municipalities a heavy duty, durable spreader that is powered by a central hydraulic system (not included). The hoppers are designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight) chassis; depending on size of spreader. It works with bulk salt, bulk sand, or a 50/50 salt/sand mix.

The highly corrosion-resistant 304 stainless steel hopper features a fully-welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 5-1/4 inch variable-pitch auger is covered by an inverted V to reduce stress on the drive line and improve material flow.

The conveyor chain is driven direct-drive hydraulic motor. The spinner is powered by a direct mount hydraulic motor. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

Hydraulic spreader controls are sold separately. A variety of options are available, including manual hydraulic, manual with load sensing, and electric over hydraulic, available with or without GPS. See Accessories below.

Product Common Use: Ice Control, Municipal Maintenance, Parking Lot Maintenance

• Product Details:
• Chute Primary Material: 304 Stainless Steel
• Chute Standard Adjustable Extended: Adjustable Height
• Controller Type: Not Included
• Drive Type: Hydraulic
• Hopper Length: 120.00"
• Hopper Material: 304 Stainless Steel
• Number of Motors: 2
• Spinner Material: Polyurethane
• Works with Bagged #1 Rock Salt: Yes
• Works with Bulk Salt: Yes
• Works with Bulk Sand: No
• Works with Salt / Sand Mix: Yes
• Capacity: 5.50 yd³
• Overall Height: 52.00"
• Overall Length: 140.00"
• Overall Width (at top): 70.00"
• Hopper Width: 70.00"
• Top Screen: Yes
• Vibrator Included: No
• Spinner Diameter: 18.00"
• Spreading Width Range: 2 To 40'
• Feed Mechanism: Full Length Auger
• Feed Mechanism 2: 5-1/4in. Variable Pitch Auger

Tech Specs

• 1470560SSH
• 14710F523211

Estimated Shipping Dimensions: 140" x 70" x 52"

Weight: 1641.37 lbs

Made in: United States