5.5 Cu.Yd. Electric Auger Municipal Hopper Spreader

SKU: 14710F527211

5.5 Cu.Yd. Electric Auger Municipal Hopper Spreader

SKU: 14710F527211

Estimated to ship in 3-5 days from closest warehouse!

Made In USA


5.5 Cubic Yard Electric Auger Feed Mid-Size Stainless Steel Hopper Spreader. 120" Hopper length. For trucks with a minimum 15,000 lbs. GVW.

  • Designed for dump bodies and flatbeds with a minimum 15,000 GVW (gross vehicle weight).
  • Durable 304 stainless steel construction for optimum corrosion resistance.
  • Powered by two independent electric motors for auger and spinner.
  • Spreads bulk salt or a 50/50 sand/salt mix.
  • In-cab controls with independent variable speeds for the conveyor and spinner.
  • 18 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
  • 5-1/4 inch variable pitch auger with a 304 stainless steel adjustable inverted V for optimum corrosion resistance and material flow reduces stress on the drive line.
  • 12 inch adjustable height swing-away spinner chute has three adjustable internal baffles and quick detach pins for convenient bulk unload, easy servicing, and access to towing.
  • Four hinged top screens with 1/4 inch diameter bars included.
  • Made in the U.S.A.

Buyers Products SaltDogg® Electric Auger Spreader gives contractors and municipalities a heavy duty electric spreader ready for commercial use. The spreader is designed for use with dump bodies or flatbeds with a minimum 15,000 lb GVW (gross vehicle weight) chassis, depending on size of spreader. It works with bulk salt or a 50/50 sand/salt mix.

The electric spreader offer a balance between the convenience and value of an electric spreader and the robust volume traditionally found in gas and hydraulic spreaders. The low maintenance auger design provides consistent material flow.

The highly corrosion-resistant 304 stainless steel hopper features a fully-welded frame. It comes equipped with two hinged top screens with 1/4 in bars. The 5-1/4 inch variable-pitch auger is covered by an inverted V to reduce stress on the drive line and improve material flow.

The auger is driven by a 3/4 HP, 12V motor, and the spinner is powered by an independent 1/2 HP, 12V motor. An 18 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Two adjustable baffles allow you to cater the spread pattern to your use. The chute and spinner assembly flips up or detaches completely, tool-free, for convenient bulk unload, easy servicing, and access to towing.

The spreader includes a heavy-duty in-cab electric controller with independent auger and spinner adjustment and a vibrator switch.

Product Common Use: Ice Control, Road Maintenance, Parking Lot Maintenance

  • Chute Primary Material: 304 Stainless Steel
  • Chute Standard Adjustable Extended: Adjustable Height
  • Controller Type: Dual Motor Variable Speed
  • Drive Type: Electric
  • Hopper Length: 120.00"
  • Hopper Material: 304 Stainless Steel
  • Number of Motors: 2
  • Spinner Material: Polyurethane
  • Works with Bagged #1 Rock Salt: Yes
  • Works with Bulk Salt: Yes
  • Works with Bulk Sand: No
  • Works with Salt / Sand Mix: Yes
  • Capacity: 5.50 yd³
  • Overall Height: 52.00"
  • Overall Length: 140.00"
  • Overall Width (at top): 70.00"
  • Hopper Width: 70.00"
  • Top Screen: Yes
  • Vibrator Included: No
  • Spinner Diameter: 18.00"
  • Spreading Width Range: 2 To 40'
  • Feed Mechanism: Full Length Auger
  • Feed Mechanism 2: 5-1/4in. Variable Pitch Auger

Tech Specs

OEM/Other Numbers:
  • 1470560SSE
  • 14710F527211

Estimated Shipping Dimensions: 140" x 70" x 52"

Weight: 1683.93 lbs

Made in: United States

We realize that the longer your snow plow is out of commission, the less money you make. Our goal is to keep you up and running so your customers are pleased with the job you do. However, we all know that cold weather can wreak havoc on outside equipment and you can only make money if your snow plow is in working order. Most of the time it is a quick fix like a cracked hose, or a broken spring; but this is not always the case and you can count on Mill Supply to help you in those harder times too. Mill Supply has been selling snow plow parts since 1986. Many in our sales staff have been on-the-job for over 30 years. With that kind of knowledge you can be assured that we can assist you with your questions and get the right parts sent out right away. Most orders placed before 3:00 PM EST will get shipped out the same day. So if your Meyer, Western, Boss, Fisher, Buyers, SAM, SnowDogg or other snow plow needs some maintenance, order today! If you're unsure as to what exactly you need, you can either contact us via email or give us a call at 800-888-5072 between 8:00 a.m. - 5:00 p.m. E.S.T. and one of our experienced representatives will be happy to help you.



VIDEOS, UPDATES, AND MORE! @millsupplyinc

Mon-Fri 8AM - 5PM EDT
Copyright ©2024 Mill Supply, Inc. ec
Mill Supply, Inc. 19801 Miles Rd. Cleveland, OH 44128

Mill Supply uses cookies to give you the best shopping experience. If you continue browsing, you agree to the use of cookies. Dismiss