Showing 1-18 of 18
Part Number: 256-0515
This product is a replacement plow motor solenoid tower style that is designed for use with the Western line of snow plows.
Part Number: 315-0175
Part Number: 256-0528
This product is a replacement replacement motor, Unimount style that is designed for use with the Fisher line of snow plows.
Part Number: 315-0172
Cap and Dipstick
Part Number: 315-0171
In-line Filter w/clamps for 315-9170
Part Number: 315-0174
Seal, Motor to Pump
Part Number: 315-0190
Elbow, 90 Degree, Standard Thread, 9/16" O-Ring
Part Number: 315-0191
9/16" O-Ring to 1/4" NPTF 90 Degree Elbow
Part Number: 315-0192
9/16" O-Ring to 1/4" NPTF/NPSM 90 Degree Elbow
Part Number: 315-0193
9/16" O-Ring to 1/4" NPTF/NPSM 45 Degree Elbow
Part Number: 315-0194
45 Degree Elbow, 9/16" O-Ring to JIC
Part Number: 315-0186
Base lug with 1" hole and O-ring. Mount holes are 3" center to center.
Part Number: 315-0187
10-24 x 3/8" Set Screw
Part Number: 256-0530
This product is a replacement pump assembly with filter and bolts for cable operated or electric solenoid power pack that is des... more
Part Number: 256-0538
This product is a replacement filter only for pump assembly (electric solenoid power pack) that is designed for use with the Fis... more
Part Number: 256-0563
This product is a replacement O-Ring for new style pump that is designed for use with the Fisher cable operated or electric... more
Fisher and Western Plows use some of the same hardware. Solenoids, Motors, O-rings, gasket and filters can be used on either plow. There are exclusive items just for the Fisher plow for the pump assembly. The pump uses its own pump reservoir - 291 CIR. If you need just the cap with dipstick this can be ordered separate. The Fisher plow also has its own: solenoid, in-line filters, o-rings, elbows and adapters to work with the o-rings that do not match up to Western plows. Special adapters that go from a 9/16" o-ring to a 1/4" NPT fitting come in straight, 45 degree and 90 degree angles.