Pivot Bar 8 piece kit, Ultramount for Western

Part Number: 256-4291

Price: $164.62

Out of Stock but Order Now! Estimated to ship in 4 days

Pivot Bar 8 piece kit for the Western Ultramount Plow. Our kit eliminates taking apart your whole plow to replace your rusted pivot bar and pins. Just cut off your old pivot bar at the rusted pins and use this kit to reassemble. Instructions included.

Kit Includes:

  • Pivot Bar
  • 2 Clevis Pins
  • 2 Washers
  • 2 Cotter Pins
  • 1 Center Bolt with Nuts

Installation Instructions:

From Western, the old pivot bar used 256-2331 and 256-2332 pivot pins. When these pins get rusted-in or broken-off you must disassemble nearly the whole plow. Our new 8-piece design pivot bar kit uses regular clevis and cotter pins to retain the pivot bar to the plow. Also, the new pivot bar has grease fittings, so the pins will not rust again.

REMOVAL

Unbolt pivot pins from bracket retaining them in. Cut the old pivot pins right next to the pivot bar using a reciprocating Sawzall. Remove center bolt and nut from pivot bar. Remove bar with frozen pins.

INSTALLATION

The new pivot bar is hollow on the back side which enables you to put the new clevis pins in from the inside out. Put a washer on each clevis pin and retain with the cotter pin. Install new center bolt and nut. Grease both pins.

 

Weight: 17.75 lbs

 

We realize that the longer your snow plow is out of commission, the less money you make. Our goal is to keep you up and running so your customers are pleased with the job you do. However, we all know that cold weather can wreak havoc on outside equipment and you can only make money if your snow plow is in working order. Most of the time it is a quick fix like a cracked hose, or a broken spring; but this is not always the case and you can count on Mill Supply to help you in those harder times too. Mill Supply has been selling snow plow parts since 1986. Many in our sales staff have been on-the-job for over 30 years. With that kind of knowledge you can be assured that we can assist you with your questions and get the right parts sent out right away. Most orders placed before 3:00 PM EST will get shipped out the same day. So if your Meyer, Western, Boss, Fisher, or other snow plow needs some maintenance, order today! If you're unsure as to what exactly you need, you can either contact us via email or give us a call at 800-888-5072 between 8:00 a.m. - 5:00 p.m. E.S.T. and one of our experienced representatives will be happy to help you.

Mon-Fri 8AM - 5PM EST
Copyright ©2019 Mill Supply, Inc.
Mill Supply, Inc. 19801 Miles Rd. Cleveland, OH 44128